Menu Close

Decocking a Barnett Crossbow: Guide 101

How to Decock a Barnett Crossbow

Decocking a Barnett crossbow, first disconnect the string by depressing the safety. Then, while holding the trigger down, use the cocking handle to slowly lower the string until it is in the resting position. Finally, release the trigger and engage the safety.

Is Barnett A Good Crossbow?

Yes, Barnett is a reputable and well-known brand in the crossbow industry. They offer a wide range of crossbows suitable for beginners to experienced hunters. Barnett is known for its high-quality materials, durability, and accuracy.

They also offer various accessories, including scopes, quivers, bolts, and more, making them a popular choice among hunters and outdoor enthusiasts. Overall, Barnett is a good brand to consider when looking for a reliable and efficient crossbow.

Decocking a Barnett Crossbow Guide 101

Decocking a Barnett crossbow is a crucial safety step that should never be skipped. Here are the steps to safely do it:

  1. Remove the arrow: The first step is to remove the arrow from the crossbow. This is an important step as it eliminates the risk of accidentally firing the crossbow while decocking it.
  2. Use a discharge target: Always use a discharge target to disband your Barnett crossbow. A discharge target is a specially designed target that is meant for this purpose. It helps to absorb the energy from the crossbow’s limbs and prevent damage.
  3. Position the crossbow: Place the crossbow on the discharge target and ensure that it is pointed in a safe direction. Make sure that no one is standing behind the target.
  4. Use a discharge bolt: A discharge bolt that is designed for this purpose. A discharge bolt is a specially designed bolt that is used for safely decocking a crossbow. It is usually made of plastic or rubber and is brightly coloured for easy identification.
  5. Cocking the crossbow: Arm the crossbow as you normally would, but instead of using an arrow, use the discharge bolt.
  6. Fire the crossbow: Aim the crossbow at the discharge target and fire the bolt. The bolt will absorb the energy from the limbs and safely release it. The limbs will return to their resting position and the crossbow will be safely unarmed.
  7. Inspect the crossbow: Once you have de-armed the crossbow, inspect it for any damage. Check the limbs, strings, and cables to ensure that they are in good condition.

It is important to note that not all Barnett crossbows decocking can be done by using a simple discharge bolt. Some models require the use of a decocking rope, so be sure to check your owner’s manual for specific instructions.

Uncocking a Barnett Crossbow without firing it

  • Point the crossbow in a safe direction 2
  • Remove the arrow from the bow 3
  • With your fingers, push down on each side of the cocking string to release the tension on the string 4
  • Slowly allow the cocking string to return to its original position.

Decocking a crossbow is a matter of personal preference. Some people feel more comfortable doing it, while others do not. If you are unsure about decocking your crossbow, it is always best to consult with the manufacturer or an expert.

Should I Let Down My Crossbow After Every Hunt?

It’s a good idea to let down your crossbow after every hunt. This will help prolong the life of your crossbow by preventing damage to the string and cables. It also prevents accidental discharge of the bow, which could injure you or someone else.

Can You Dry Fire a Barnett Crossbow?

Yes, you can dry-fire a Barnett crossbow. However, doing so will void the warranty on the crossbow and may damage the bow. Dry firing a crossbow means shooting it without an arrow or bolt loaded.

This puts unnecessary strain on the bow and can break the string or damage other crossbow parts.

What is a Crossbow Decocking Bolt?

A decocking bolt is a crossbow bolt designed to be shot into the ground to safely release the tension on the bowstring.

This allows the user to avoid manually uncocking the crossbow, which can be dangerous if not done correctly.

Decocking bolts are typically made of aluminium or other lightweight materials, and they have blunt tips to minimize damage when they impact the ground.

Barnett Xp 350 How To Use

The Barnett XP 350 is a crossbow that is designed for hunting and target shooting. Here are the steps to properly use it:

  1. Assemble the crossbow by attaching the limbs to the stock.
  2. Use the supplied hex wrench to attach the quiver mount to the underside of the stock.
  3. Attach the quiver to the quiver mount.
  4. Install a scope or red dot sight if desired.
  5. Attach the cocking rope to the string.
  6. Place one foot in the stirrup at the front of the stock.
  7. Pull the cocking rope to draw the string back and lock it in place.
  8. Load a bolt or arrow onto the barrel, aligning the nock with the string.
  9. Take aim at the target or game, and gently squeeze the trigger to release the bolt.
  10. After firing, remove the bolt and repeat the process for the next shot.

Always follow the manufacturer’s instructions and guidelines for safe operation of the Barnett XP 350 crossbow.

How To Use Barnett Crossbow Scope

Here are the steps to use a Barnett crossbow scope:

  1. Mount the scope: Start by mounting the scope on the Picatinny rail on top of your Barnett crossbow. The scope should come with a set of rings that attach to the scope’s base, securing it to the rail. Tighten the screws on the rings to make sure they are secure.
  2. Adjust the eye relief: The eye relief is the distance between the eyepiece and your eye that allows you to see a clear image. Adjust the scope’s eye relief by moving it forward or backward until you have a clear, focused image of your target.
  3. Zero the scope: Before you can use your crossbow, you need to zero the scope. To do this, you need to fire a few shots at a target and adjust the scope until the arrows hit where you aim.
  4. Adjust the windage and elevation: Once you’ve zeroed your scope, you can adjust the windage and elevation. These controls are usually located on the top and right side of the scope. Adjust them to make sure the scope is lined up with your target.
  5. Test your scope: Once you’ve mounted, adjusted, and zeroed your scope, you need to test it to make sure it’s working correctly. Take a few practice shots at a target to see if the arrows are hitting where you aim.

It’s important to read the instruction manual that comes with your Barnett crossbow scope carefully to make sure you understand all the features and how to use them properly.

Conclusion

If you own a Barnett crossbow, knowing how to let down your crossbow is important.

The good news is that it is not difficult to do. Here are the steps:

1. First, make sure that the crossbow is unloaded. Remove the arrow and bolt from the bow.

2. Next, engage the safety switch so the crossbow cannot be fired accidentally.

3. Hold onto the front of the bow with one hand while depressing the string release lever with your other hand. This will let you slowly release the string’s tension and safely un-arm the bow.