Menu Close

How To Mount Deer Antlers Without Skull

After a successful hunt, the first step in mounting deer antlers is to skin the skull. This will provide access to the base of the antlers. Next, the antlers need to be removed from the skull.

This can be done by sawing through the connective tissue at the base of the antlers. Once the antlers are removed, the skull can be cleaned and prepped for mounting. The most common way to mount deer antlers is on a plaque.

Plaques can be made from wood, metal, or other materials. The antlers can be mounted directly to the plaque or they can be attached to a mount that is then attached to the plaque. Plaques can be hung on the wall or displayed on a shelf or table.

Deer antlers can also be mounted without a plaque. This can be done by attaching the antlers directly to a wall or piece of furniture. Antlers can also be mounted on a stand.

Stands can be made from a variety of materials including wood, metal, or plastic. No matter how you choose to mount your deer antlers, the end result should be a display that you can be proud of. Mounting deer antlers is a great way to show off your trophy and preserve the memories of your hunt.

  • Gather the supplies needed including deer antlers, a screw, a drill, and some strong wire
  • Clean the deer antlers with soap and water to remove any dirt or debris
  • Drill a small hole into each antler near the base
  • Run a length of wire through the holes in the antlers and twist to secure
  • Hang the antlers on a wall or in a display case


Diy deer antler mount ideas

Deer antler mounts are a popular way to display your trophy, but they can be expensive. If you’re looking for a more budget-friendly option, you can create your own deer antler mount with these DIY ideas. To start, you’ll need to gather some supplies.

For the antlers, you can either find shed antlers or use ones that have been harvested. You’ll also need a piece of wood or plaque for the mount, some wire or screws to attach the antlers, and some felt or other material to protect the wall from scratches. Once you have your supplies, you’re ready to get started.

If you’re using shed antlers, simply screw or wire them into the wood or plaque. If you’re using harvested antlers, you’ll need to drill holes into the antlers and then screw or wire them into the mount. Once the antlers are secured, you can add the felt or other material to the back of the mount to protect your wall.

And that’s it! You now have your very own DIY deer antler mount.

how to mount deer antlers without skull


How do you mount an antler without a skull?

If you’re looking to mount an antler without a skull, there are a few things you’ll need to do. First, you’ll need to remove the antler from the skull. This can be done by cutting through the skin and meat around the base of the antler with a sharp knife.

Be careful not to damage the antler while you’re doing this. Once the antler is removed, you’ll need to clean it. This can be done by soaking it in a solution of water and bleach for a few hours.

After it has soaked, scrub the antler with a stiff brush to remove any remaining tissue or blood. Once the antler is clean, you’ll need to prepare it for mounting. This can be done by drilling a hole through the base of the antler.

The hole should be big enough to fit a mounting screw. Once the hole is drilled, screw the antler into the desired location. With a little bit of time and effort, you can easily mount an antler without a skull.

Just be sure to take your time and be careful not to damage the antler while you’re working.

How do you attach deer antlers to wood?

Deer antlers are a beautiful addition to any home décor, and they can be attached to wood easily and securely. Here are the supplies and steps you’ll need to follow: Supplies:

-Deer antlers -Wood glue -C-clamps

-Ruler or measuring tape -Pencil Instructions:

1. Begin by measuring the width of your deer antlers. You’ll need this measurement to determine how wide to make the notches in your wood. 2. Cut notches into your wood piece using a saw.

The notches should be as wide as the width of your deer antlers, and they should be cut about 1-2 inches deep. 3. Apply wood glue to the notches and insert your deer antlers. 4. Secure the deer antlers in place by clamping them with C-clamps.

5. Allow the glue to dry completely before removing the clamps. Your deer antlers should now be securely attached to your wood piece! You can display them as-is or add additional embellishments, like paint or stain.

How do you mount a deer antler set?

Deer antlers are a beautiful addition to any home, and with the right mounting, they can last for many years. The first step is to find the right size and shape of antlers for your space. You’ll also want to consider the orientation of the antlers – whether you want them pointing up, down, or to the side.

Once you’ve selected the perfect set of antlers, it’s time to start mounting. You’ll need a few supplies, including a sawtooth hanger, screws, and wall anchors. First, use the sawtooth hanger to mark the top of the antlers.

Then, holding the antlers in place, use the screws to attach the hanger to the wall. Finally, use the wall anchors to make sure the screws are secure. With a little bit of effort, you can easily mount a deer antler set in your home.

With the right supplies and some careful planning, you can create a stunning display that will last for years to come.

Can you mount shed antlers?

If you’re lucky enough to find a shed antler while out hiking or hunting, you may be wondering if you can mount it. The answer is yes, you can mount shed antlers. The first thing you’ll need to do is clean the antler.

You can do this by soaking it in a vinegar and water solution for a few hours. Once it’s clean, you’ll need to let it dry completely. Once it’s dry, you can start the mounting process.

You’ll need to drill a small hole in the base of the antler, so you can insert a screw. You can then screw the antler into a piece of wood or a plaque. If you want to get really creative, you can even create a chandelier out of shed antlers.

All you need to do is drill a hole in the center of each antler and thread a piece of wire through it. You can then hang the antlers from the ceiling and add a light fixture to the center. So, there you have it.

You can definitely mount shed antlers. Just be sure to clean them first and drill a small hole in the base before getting started.


Deer antlers are a beautiful addition to any home, but if you don’t want to deal with the skull, there are a few ways to mount them without it. You can use a fake skull, which can be found at most craft stores, or you can use a piece of wood shaped like a skull. You can also just mount the antlers on the wall without any skull at all.

Whichever way you choose, your deer antlers will look great and be a conversation starter in your home.