Menu Close

How to Fix Rtic Cooler Zipper

If your RTIC cooler zipper is stuck, you can try a few things to fix it. First, make sure the teeth on the zipper are aligned. If they’re not, you can try gently pushing them back into place with a small tool like a pen or paperclip.

If that doesn’t work, you can try using pliers to realign the teeth. If the zipper still won’t budge, you may need to replace the entire zipper.


RTIC Zipper Replacement
  • The first step is to unzip the cooler and lay it flat
  • Next, locate the broken or damaged zipper teeth
  • Using a pair of needle nose pliers, gently remove any debris from the teeth
  • Once the teeth are clear, line up the two sides of the zipper and begin closing it slowly and carefully
  • If the zipper jambs again, repeat steps 2-4 until it closes smoothly

How to fix zipper on Rtic cooler

Can Rtic Zippers Be Repaired?

There are a few things you can do to repair RTIC zippers. First, try using a cotton swab or toothpick to clear out any dirt or debris that may be caught in the zipper teeth. If the zipper is still not functioning smoothly, you can try using a pencil eraser to gently rub away any remaining build-up.

If these methods do not work, you may need to replace the zipper entirely.

What Do You Put on a Rtic Cooler Zipper?

If you own a RTIC cooler, you know how great they are at keeping things cold. But what do you put on the zipper to keep it from freezing shut? There are a few different things you can use, but the best thing is probably vaseline.

Just put a small amount on the zipper and it will keep it from freezing shut. You can also use WD-40 or even just soap. So if your cooler zipper is giving you trouble, try one of these things and it should fix the problem!

How Do You Fix a Broken Zipper Slider?

If your zipper slider has come off completely, you can reattach it by following these steps: 1.Thread the needle with a strong thread. You can use clear nylon thread or polyester thread.

2.Align the two pieces of the slider so that the teeth are meshed together. If the teeth are not lined up, your zipper will not work correctly. 3.Start at one end of the slider and sew through both pieces to secure them together.

Try to keep your stitches as small and close together as possible so that they don’t come undone easily. 4.Once you reach the other end of the slider, knot your thread securely and cut off any excess thread.

How Do You Fix the Zipper on a Yeti Cooler?

If you’re like most people, you probably use your Yeti cooler on a regular basis. Over time, the zipper can start to wear down and become less effective. When this happens, it’s important to know how to fix the zipper so that your Yeti cooler can continue to keep your food and drinks cold.

The first thing you’ll need to do is identify the problem. Is the zipper stuck? Or is it simply not closing properly?

If the zipper is stuck, you may be able to free it by gently tugging on both sides of the zipper. If the zipper is not closing properly, there are a few things you can try. First, make sure that both sides of the zipper are lined up correctly.

Sometimes the fabric can get caught in between the teeth of the zippers, preventing them from lining up correctly. Second, try using a pencil or pen to push down on one side of the teeth while pulling up on the other side. This can help line up the teeth so that they close properly.

If neither of these solutions work, you may need to replace your Yeti cooler’s zipper entirely. This is a fairly simple process that just requires a few household tools. First, remove the old zipper by carefully cutting it away from the fabric with scissors or a knife.

Next, measure and cut a new piece of fabric to fit in its place using either scissors or a rotary cutter. Once you have your new piece of fabric cut out, sew it into place using a sewing machine or needle and thread.

How to Fix Rtic Cooler Zipper off Track

If your RTIC cooler zipper has come off track, don’t despair! There is a way to fix it. With a little patience and some time, you can have your zipper working like new again.

To begin, you will need to gather a few supplies. You will need a Phillips head screwdriver, a flat head screwdriver, and some pliers. Once you have these items, locate the two screws on the back of the RTIC cooler that hold the top and bottom halves together.

Remove these screws with your Phillips head screwdriver. Next, take your flat head screwdriver and insert it into the small hole in the side of the cooler near where the zipper is located. Gently pry up on the screwdriver until you hear a click.

This will release the tension on the zipper so that you can work with it more easily. Now it’s time to get to work on fixing the zipper itself. First, find the metal tab at the end of the zipper (this is what came off track).

Use your fingers to bend this tab back into place so that it once again lines up withthe teeth ofthe zipper. Once this is done, gently pull on both sides ofthe zipper untilit slides smoothly alongthe lengthofthETRICcooler opening. Ifyou run into any snags or resistance, simply use your fingers to realign thteeth before continuingto zipupyour cooler.

Witha little bitof effortand patience,you can easily fix anRTICcoolerzipperthat has comeofftrack!

Conclusion

If your RTIC cooler zipper is stuck or broken, there are a few things you can do to fix it. First, try using a little WD-40 or Vaseline on the teeth of the zipper. If that doesn’t work, you can try using a needle and thread to sew the zipper back together.

Finally, if all else fails, you can always replace the zipper with a new one.